Merge/sound upstream 20200409

Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml

@@ -49,7 +49,7 @@ required:
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    i2c@0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 

Documentation/devicetree/bindings/sound/ingenic,aic.yaml

@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs AC97 / I2S Controller (AIC) DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^audio-controller@'
+
+  compatible:
+    oneOf:
+      - enum:
+        - ingenic,jz4740-i2s
+        - ingenic,jz4760-i2s
+        - ingenic,jz4770-i2s
+        - ingenic,jz4780-i2s
+      - items:
+        - const: ingenic,jz4725b-i2s
+        - const: ingenic,jz4740-i2s
+
+  '#sound-dai-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AIC clock
+      - description: I2S clock
+      - description: EXT clock
+      - description: PLL/2 clock
+
+  clock-names:
+    items:
+      - const: aic
+      - const: i2s
+      - const: ext
+      - const: pll half
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for I2S RX
+      - description: DMA controller phandle and request line for I2S TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - '#sound-dai-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    aic: audio-controller@10020000 {
+      compatible = "ingenic,jz4740-i2s";
+      reg = <0x10020000 0x38>;
+
+      #sound-dai-cells = <0>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <18>;
+
+      clocks = <&cgu JZ4740_CLK_AIC>,
+               <&cgu JZ4740_CLK_I2S>,
+               <&cgu JZ4740_CLK_EXT>,
+               <&cgu JZ4740_CLK_PLL_HALF>;
+      clock-names = "aic", "i2s", "ext", "pll half";
+
+      dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+      dma-names = "rx", "tx";
+    };

Documentation/devicetree/bindings/sound/rockchip-i2s.yaml

@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip I2S controller
+
+description:
+  The I2S bus (Inter-IC sound bus) is a serial link for digital
+  audio data transfer between devices in the system.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-i2s
+      - items:
+          - enum:
+            - rockchip,px30-i2s
+            - rockchip,rk3036-i2s
+            - rockchip,rk3188-i2s
+            - rockchip,rk3228-i2s
+            - rockchip,rk3288-i2s
+            - rockchip,rk3328-i2s
+            - rockchip,rk3366-i2s
+            - rockchip,rk3368-i2s
+            - rockchip,rk3399-i2s
+          - const: rockchip,rk3066-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for I2S controller
+      - description: clock for I2S BUS
+
+  clock-names:
+    items:
+      - const: i2s_clk
+      - const: i2s_hclk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rockchip,capture-channels:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Max capture channels, if not set, 2 channels default.
+
+  rockchip,playback-channels:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Max playback channels, if not set, 8 channels default.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property for controllers which support multi channel
+      playback/capture.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2s@ff890000 {
+      compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+      reg = <0xff890000 0x10000>;
+      interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+      clock-names = "i2s_clk", "i2s_hclk";
+      dmas = <&pdma1 0>, <&pdma1 1>;
+      dma-names = "tx", "rx";
+      rockchip,capture-channels = <2>;
+      rockchip,playback-channels = <8>;
+      #sound-dai-cells = <0>;
+    };

Documentation/devicetree/bindings/sound/tlv320adcx140.yaml

@@ -76,7 +76,6 @@ examples:
       codec: codec@4c {
         compatible = "ti,tlv320adc5140";
         reg = <0x4c>;
-        ti,use-internal-areg;
         ti,mic-bias-source = <6>;
         reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
       };

Documentation/kbuild/kbuild.rst

@@ -237,7 +237,7 @@ This is solely useful to speed up test compiles.
 KBUILD_EXTRA_SYMBOLS
 --------------------
 For modules that use symbols from other modules.
-See more details in modules.txt.
+See more details in modules.rst.
 
 ALLSOURCE_ARCHS
 ---------------

Documentation/kbuild/kconfig-macro-language.rst

@@ -44,7 +44,7 @@ intermediate::
             def_bool y
 
 Then, Kconfig moves onto the evaluation stage to resolve inter-symbol
-dependency as explained in kconfig-language.txt.
+dependency as explained in kconfig-language.rst.
 
 
 Variables

Documentation/kbuild/makefiles.rst

@@ -924,7 +924,7 @@ When kbuild executes, the following steps are followed (roughly):
 	$(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that
 	are used for assembler.
 
-	From commandline AFLAGS_MODULE shall be used (see kbuild.txt).
+	From commandline AFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_CFLAGS_KERNEL
 	$(CC) options specific for built-in
@@ -937,15 +937,15 @@ When kbuild executes, the following steps are followed (roughly):
 
 	$(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that
 	are used for $(CC).
-	From commandline CFLAGS_MODULE shall be used (see kbuild.txt).
+	From commandline CFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_LDFLAGS_MODULE
 	Options for $(LD) when linking modules
 
 	$(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options
 	used when linking modules. This is often a linker script.
 
-	From commandline LDFLAGS_MODULE shall be used (see kbuild.txt).
+	From commandline LDFLAGS_MODULE shall be used (see kbuild.rst).
 
     KBUILD_LDS
 

Documentation/kbuild/modules.rst

@@ -470,9 +470,9 @@ build.
 
 	The syntax of the Module.symvers file is::
 
-	<CRC>       <Symbol>          <Namespace>  <Module>                         <Export Type>
+	<CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-	0xe1cc2a05  usb_stor_suspend  USB_STORAGE  drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL
+	0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
 	The fields are separated by tabs and values may be empty (e.g.
 	if no namespace is defined for an exported symbol).

Documentation/sound/alsa-configuration.rst

@@ -2234,6 +2234,19 @@ use_vmalloc
     buffers.  If mmap is used on such architectures, turn off this
     option, so that the DMA-coherent buffers are allocated and used
     instead.
+delayed_register
+    The option is needed for devices that have multiple streams
+    defined in multiple USB interfaces.  The driver may invoke
+    registrations multiple times (once per interface) and this may
+    lead to the insufficient device enumeration.
+    This option receives an array of strings, and you can pass
+    ID:INTERFACE like ``0123abcd:4`` for performing the delayed
+    registration to the given device.  In this example, when a USB
+    device 0123:abcd is probed, the driver waits the registration
+    until the USB interface 4 gets probed.
+    The driver prints a message like "Found post-registration device
+    assignment: 1234abcd:04" for such a device, so that user can
+    notice the need.
 
 This module supports multiple devices, autoprobe and hotplugging.
 

Documentation/sound/hd-audio/index.rst

@@ -8,3 +8,4 @@ HD-Audio
    models
    controls
    dp-mst
+   realtek-pc-beep

Documentation/sound/hd-audio/models.rst

@@ -216,8 +216,6 @@ alc298-dell-aio
     ALC298 fixups on Dell AIO machines
 alc275-dell-xps
     ALC275 fixups on Dell XPS models
-alc256-dell-xps13
-    ALC256 fixups on Dell XPS13
 lenovo-spk-noise
     Workaround for speaker noise on Lenovo machines
 lenovo-hotkey